EasyClean® Bazooka®:
The EasyClean Bazooka automatic taper simultaneously applies
tape and joint compound to all wallboard joints - horizontal
and vertical joints, ceiling joints, interior/exterior corners
and angles. This EasyClean taper automatically dispenses
the precise amount of tape and compound for fast, efficient
operation. Most importantly, this taper is designed to be
used with certain quick setting compounds when cleaning
is done with the Ames Tool Wash System.
Back To Top
Corner
Roller:
This rugged tool embeds the joint tape firmly into corner
and ceiling angles, forcing out excess compound and leaving
the angle ready for finishing.
Back To Top
7", 10" and 12" EasyClean® Finishers: Available in three widths (7", 10", and 12"),
the Ames Flat Finisher applies joint compound over taped
joints. The adjustable, hardened-steel blade trowels the
compound, feathers the edge and leaves just the right amount
of 'crown' down the middle. The finished joint needs little
or no sanding. This tool is also designed to be easily cleaned
and used with certain quick setting compounds when cleaning
is done with the Ames Tool Wash System.
Back To Top
3"
EasyRoll® Adjustable Corner Finisher:
The Adjustable Corner Finisher is designed to handle first
and second coats with a simple cam adjustment. This tool
wipes down and feathers both sides in one pass. Wheels move
tool along angle joints with less effort.
Back To Top
3"
Corner Finisher:
The Ames Corner Finisher is used to skim interior 90 degree
angles after the bedding coat is applied. High carbon steel
blades remove excess compound and feather the edges for
a finish that needs little or no sanding.
Back To Top
Corner
Applicator:
Used with the Corner Finisher to apply topping and finishing
coats to interior 90-degree angles.
Back To Top
2" and 3" EasyClean® Nail Spotters:
The Ames Nail Spotter applies compound to nail or screw-head
dimples. Fill a row of dimples with one pass. The crowned,
high carbon steel blade allows for shrinkage of compound.
The finished joint needs little or no sanding. This tool
is also designed to be easily cleaned and used with certain
quick setting compounds when cleaning is done with the Ames
Tool Wash System.
Back To Top
EasyClean® Super Pump (includes Cobra Gooseneck):
Ames automatic tools with joint compound are easily filled
with this pump. Use the Easy Clean Super Pump with the Gooseneck
adapter to load the Bazooka brand taper or use the Nozzle
adapter to fill Flat Finishers, Corner and Flat Applicators
and Nail Spotters. And, as with the above tools, this Pump
is designed to be easily disassembled, cleaned and used
with certain quick setting compounds when cleaning is done
with the Ames Tool Wash System.
Back To Top
EasyFinish™ Handles (34" to 72"): Specially designed for use with the Ames Flat Finisher,
these sturdy handles are available in size lengths (34",
42", 54", and 72"). Finisher Handles allow
you to complete most of the work from the floor.
Back To Top |
